Vvt cams

[kha4079]

i know im probably getting on everyones nerves, but i wanna know an update on them!!! im getting my income tax so i should have a good amount of change to buy them! :peace:

[R3DN1CK]

check with nickspeed

[nickspeed]

What do you want to know and I will answer what I can, were very heavy into the testing for them and are trying to get them done asap so you the customer can have a alsome product.

[nickspeed]

And there going called cvtcs cams, thats the name of the system nissan used for the vvt setup on the vk56. Been learing about the controller and what it does to the cams, crazy stuff.

[R3DN1CK]

I saw something that looks like a truck that had jwt cams in it, guy picked me up and we went for a ride.

[nickspeed]

I saw something that looks like a truck that had jwt cams in it, guy picked me up and we went for a ride.

At 2am in the back roads of east country.

[R3DN1CK]

yep, that was it... think it might have been after an 10pm banks install, airport shuttle run, and some test driving.

[nickspeed]

Yep that was a crazy nite!

[O-Fivecc]

Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

[kha4079]

And there going called cvtcs cams, thats the name of the system nissan used for the vvt setup on the vk56. Been learing about the cotroller and what it does to the cams, crazy stuff.

whats the cam specs on it if u know them and can they make them with a lower lsa???

[nickspeed]

Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

I asked about working on a drag setup cam that would still work on the street. U say you want it to be loppy at idel, well jwt like it's to act as stock as possible at idel so it will be somg able. Plus then you have to turn the idle up to help stedy it which then make the truck want to go so you have to hold the brakes on at a stop light or it going to take off on you.

[Layer1]

I asked about working on a drag setup cam that would still work on the street. U say you want it to be loppy at idel, well jwt like it's to act as stock as possible at idel so it will be somg able. Plus then you have to turn the idle up to help stedy it which then make the truck want to go so you have to hold the brakes on at a stop light or it going to take off on you.

Ah, brings back memories from my oldest brother Goat he use to have.

[kha4079]

custom tuning will fix that issue :D if i have to idle @ 800 rpms then ill do it. gm guys idle at 800 rpms+ depending on how big of a cam it is. this is my friends truck when he had a 408 stroker kit with a 112 lsa stroker cam http://www.youtube.com/watch?v=Td-3xX9rkqY once he got it tuned it idled @ 1000 rpms and still very lopey :)

[nickspeed]

whats the cam specs on it if u know them and can they make them with a lower lsa???

I will ask about the lsa, there is a lot that comes it to play with the vvt on the lob angle. And I will see if i can get the specs. Here is what they got for the V6 motors.
http://www.jimwolftechnology.com/wolfpdf/CAM_SPEC_CARD_VQ35_INCL_REVUP.pdf

[nickspeed]

And this is a good read too.
http://www.jimwolftechnology.com/wolfpdf/camshaft_secrets.pdf

[kha4079]

too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

[nickspeed]

too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

The non vvt S2 cam is on 114 lsa, or very close to it.

[nickspeed]

too much reading lol im still trying to catch up. if they cant make really lopey cams i can live with a 114 lsa or 115 lsa :D

Yea, talking with Clark will make you head hurt, just ask toomnymods. Clark is one smart wizard, Bosch and Ford engineer's call him to ask questions.

[kha4079]

wow i didnt know that lol their products work wonders! :D

[nickspeed]

wow i didnt know that lol their products work wonders! :D

And they do ecu's too. There is still so many Z32 customer's keeping then busy that they havent had time to sent up the 2000+ style ecu's.But there working on it.

This tool is sweet too.

http://www.jimwolftechnology.com/wolfpdf/VQ_SPRING_REMOVER_INST.pdf

[06_footy]

Are their going to be any other cam options for us 04-06 guys? Group buy price?? LOL JK

I like a group buy..Im just saying this is the only groupie id ever be apart of with abunch of dudes. But seriously thats an awesome idea!

[nickspeed]

If we can get ten on board I will ask.

[08BLIZZARD]

id love to get my hands on a set of cams!!!!

[R3DN1CK]

id love to get my hands on a set of cams!!!!

i'd rather have them in my motor

[kha4079]

x2 :) i hope i get this job im testing for soon :D

[R3DN1CK]

And they do ecu's too. There is still so many Z32 customer's keeping then busy that they havent had time to sent up the 2000+ style ecu's.But there working on it.

This tool is sweet too.

http://www.jimwolftechnology.com/wolfpdf/VQ_SPRING_REMOVER_INST.pdf

JWT makes some badass stuff, i had a little bucket 1.6 Sentra that had cams, ecu, flywheel, exhaust and a pop charger that would break off new RSX's and Si's. They make the magic happen for Nissan.

[kha4079]

patiently waiting :)

[tat2titan]

I'm still a couple mod's short of being ready to start saving for some JWT cam's. :)

I'm going to mod my exhaust 1st. I just bought a 2.25" - 3" Y-pipe, to replace my 3" BanK's Y. Toomnymod's said he lost too much low end from his Bank's, when he 1st. added his cam's. Then i'm going to build some B-pipes w/ hi-flow cat's.
After that it's time for some CAM'S!!!!

[O-Fivecc]

Me too, I'm going to be piecing together some upgraded tranny parts along the way as well

[nickspeed]

patiently waiting :)

Will have news very shortly, was working on the truck over the last two days.
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0224.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0240.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0239.jpg
http://i30.photobucket.com/albums/c340/nismonick/VK56/DSC_0251.jpg

[R3DN1CK]

I've seen your insides.... that sounds wrong. Now lets see those Numbers!

[nickspeed]

Numbers when were are all done testing.

[R3DN1CK]

need more voulunteers?

[nickspeed]

Yea, want two turbo's stuff in that engine bay?

[R3DN1CK]

game on... let me know

[Warp09]

Yea, want two turbo's stuff in that engine bay?

Hell yeah!!

[von]

I'll let them keep y truck as long as they have too.

[nickspeed]

There finishing up the twin turbo kit for the VHR 3.5L with the dual throttle body right now.

[von]

Kool. Tell them we are next

[nickspeed]

They hinted at it. Got to finish the cam testing first, then PGIM, then got from there.

[von]

Kool. Let us know

[kha4079]

ooooh man finish her up and put her on the dyno!! i wanna see how much she puts out with just the cam swap :D

[R3DN1CK]

lets play the guessing game... everyone only gets 1 guess as to the increase in peak HP. Can't guess the same # as the other person and closest wins a prize to be determined. Maybe a JWT sticker or something like that.

[R3DN1CK]

I will guess 21

[08BLIZZARD]

18hp

[nickspeed]

They made more then that.

[08BLIZZARD]

damn... do i get a revote


can i have my cams yet?!?!?!?!?!

[Warp09]

56 hp

[nickspeed]

56 hp

I wish, when fully tuned they might.

[nickspeed]

damn... do i get a revote


can i have my cams yet?!?!?!?!?!

Go for it!

[R3DN1CK]

56 hp

stock motor, no intake, no exhaust... optimistic

[Warp09]

Hmm, figured since Toomny made 30 HP on his, and you are VVT, it may close to double that! LOL
My guess is 41 HP now then lol

[nickspeed]

Hmm, figured since Toomny made 30 HP on his, and you are VVT, it may close to double that! LOL
My guess is 41 HP now then lol

I got intake and exhaust coming so we will see where it stands when here on. VVT really does add as much power as it would seem :/ but that is untuned so there might still be a lot to get out of it.

[nickspeed]

And will have to see what the PGIM does with the cams!

[kha4079]

i think it gave at least 28-34 crank hp before tune :D after tinkering with the cam phasing im pretty sure itll be at least 30 rwhp :D

[O-Fivecc]

must be nice

[nickspeed]

i think it gave at least 28-34 crank hp before tune :D after tinkering with the cam phasing im pretty sure itll be at least 30 rwhp :D

Somebody is really close, and the gain is at hub's on the dynapack. With intake, exhaust and tune there should be a lot of power to be had.

[kha4079]

what can i say i haz mad skills and guesses :D any new updates? im impatient!!!! lol

[nickspeed]

what can i say i haz mad skills and guesses :D any new updates? im impatient!!!! lol

I went by jwt today and they were working in the PR, should have it by the end of the week.

[von]

PR?

[Twistedfreedom]

PreRunner?

[R3DN1CK]

PR?

Press release

[kha4079]

are they nitrous friendly cams??? :D

[nickspeed]

are they nitrous friendly cams??? :D

Good question, I am not shure but they act just like the early ones do so if toomnymods and the others were on the bottle then I would say you fine.

[SiMpLyMoDiFiEd]

what is the price range on these?

[R3DN1CK]

what is the price range on these?

tba, would assume it would be with the press release

[nickspeed]

what is the price range on these?

The early one's are 1198.99 so these will be in the same ball park.

http://www.jimwolftechnology.com/customer_part_detail.asp?PartID=473

[SiMpLyMoDiFiEd]

So would we need uprev with these?

[nickspeed]

So would we need uprev with these?

If you want max power yea, a handheld will not work with cams.

[SiMpLyMoDiFiEd]

That's why I sold my headers didn't want to have to get uprev

[nickspeed]

Most people that even up doing cams already have uprev so it is just a retune when they install the cams.

[SiMpLyMoDiFiEd]

I would have had uprev but my superchips was Free

[nickspeed]

Free is good!

[von]

Yup street tunes are Badass. LoL. Thats not a bad price for cams. Bcs its 4 cams.

[nickspeed]

$300 a cam x 4. A cam for any sohc set up is atleast $300.00ea

[SiMpLyMoDiFiEd]

I love sponsers :)

[von]

$300 a cam x 4. A cam for any sohc set up is atleast $300.00ea

True. True. True. Any type of after market cam is in that same price range $300+. So $1200 is a real good price for JWT cams. IMO

[08BLIZZARD]

LET ME HAVE SOME!!!!!

and just for shits and giggles. those of you who are going to purchase, who will be doing your install??

[R3DN1CK]

True. True. True. Any type of after market cam is in that same price range $300+. So $1200 is a real good price for JWT cams. IMO

agreed!

[kha4079]

u sold headers cuz u didnt want to buy uprev???????????? wow its like throwing a tbone steak away just to eat chicken...

[SiMpLyMoDiFiEd]

lol I will get more I have other things that are more important

[kha4079]

kool whats the latest news???????

[nickspeed]

There working on getting them made as we speak. They will be ready very soon! Who is going to be the fastest FST now?

[08BLIZZARD]

There working on getting them made as we speak. They will be ready very soon! Who is going to be the fastest FST now?

with tru trac or without tru trac :)

[O-Fivecc]

me

[08BLIZZARD]

me

im pretty sure your right

[O-Fivecc]

I think KHA may do it

[nickspeed]

I would say it is going to be between you and KHA for shure!

[O-Fivecc]

His truck is faster in the same DA

[kha4079]

once i get long tubes ill probably get a lil faster ;)

[O-Fivecc]

Yes, I think you will get a nip faster...And good lord man, get another CAI LOL...I actually just bought an OEM modded intake (only paid shipping). I'm thinking about putting it on and seeing what the difference is, just for shits and giggles. Man, if we got a good TB/Mani/cam set-up....Look out low 13's NA all day especially for you 07+ guys...maybe with a short belt squeeze out a high 12? That might be optimistic, worth a shot though. Then the Titan should be a pretty respectable truck, even NA

[kha4079]

nah im good with my ghetto air intake :D whats the news on cams???

[08BLIZZARD]

i will be in the 12's someday...(sigh)

[kha4079]

lol u will its fun :D

[von]

Its fun going fast

[tat2titan]

Yes it is! I got a need for speed! LOL

[kha4079]

updates plz :D

[R3DN1CK]

updates plz :D

agreed, those cams have been in way too long without a pr.

[nickspeed]

Waiting for the product to show up so when they say go there will be sticks on the shelf to buy. Then it will be here kitty kitty come and get it!

[kha4079]

my card is shaking in my wallet :)

[nickspeed]

Ok the Offical name is got to be CS2 CAMS for the cvtcs system. They will be here very soon and the PR will be out then!

[kha4079]

Ok the Offical name is got to be CS2 CAMS for the cvtcs system. They will be here very soon and the PR will be out then!

woohoooo!!! thanks for the update!!!!:peace::peace::peace: