PDA

View Full Version : suspension help again


mjv8507
02-01-2010, 12:29 AM
So i finally was able to install my springtech lowering leaf, i get ready to put the ubolts back on and nope.. They do not fit. The springtech leafs are 1/16wider than the stock ones, Has anyone had this problem... I can get them on by hammering on them, but then they widen out at the bottom and i can not get the bottom plate to match up..

Please help...

Thanks in advance... I have been at this since 3pm Central time :(
Twistedfreedom
02-01-2010, 01:33 AM
drill the holes on the bottom plate.
we're talking 1/32nd of an inch on each side..
von
02-01-2010, 01:34 AM
Where exactly n houston are you? I might be able to help. You got a pm.
ThomasBarnard
03-15-2012, 05:51 AM
So i finally was able to install my springtech lowering leaf, i get ready to put the ubolts back on and nope.. They do not fit. The springtech leafs are 1/16wider than the stock ones, Has anyone had this problem... I can get them on by hammering on them, but then they widen out at the bottom and i can not get the bottom plate to match up..

Please help...

Thanks in advance... I have been at this since 3pm Central time :(

apology for this one but i was about to ask for your help guys. i really annoyed on how can i fix my car suspension. dont know where can i start or how can i start to fix it. hope someone here could help me on this.