n2titan
01-17-2010, 09:15 PM
Basically, I prefer the windows down vs. A/C. One thing I can't stand is debris flying in from the rear window.
Unfortunately, the parking lot at work is full of trees and I can't avoid the falling leaves.
Problem solved with this DIY.
It's easy and inexpensive.
Products were purchased from Lowe's or any hardware store.
Items needed:
Screen (black or charcoal)
Screen frame
Screen frame corners (available in black)
Screen spline
Velcro (optional)
http://i105.photobucket.com/albums/m228/time2board/IMG_0442.jpg
Tools needed:
Screen tool
Hacksaw
Scissors
Measuring tape
Blade
http://i105.photobucket.com/albums/m228/time2board/IMG_0443.jpg
Step 1:
Cut the screen frame in four pieces
(2) measuring 12"
(2) measuring 28.5"
Step 2:
Attach the screen frame corners
http://i105.photobucket.com/albums/m228/time2board/IMG_0445.jpg
Step 3:
Attach the screen to the frame
Step 4:
Paint the frame flat black to match interior.
End Result (before paint)
*Camera flash caused the screen to look gray... it's really black
http://i105.photobucket.com/albums/m228/time2board/IMG_0448.jpg
http://i105.photobucket.com/albums/m228/time2board/IMG_0449.jpg
End Result (after paint)
Screen and window
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-25.jpg
Screen and window (halfway)
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-26.jpg
From outside
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-25-1.jpg
The measurements are precise so that you don't need to use Velcro. It's pretty snug.
I placed the screen inside the cabin to protect it from the elements.
Also, I've been known to forget to roll up the rear window. With the screen present, it doesn't look so obvious that the window is down.
Happy Modding!
Unfortunately, the parking lot at work is full of trees and I can't avoid the falling leaves.
Problem solved with this DIY.
It's easy and inexpensive.
Products were purchased from Lowe's or any hardware store.
Items needed:
Screen (black or charcoal)
Screen frame
Screen frame corners (available in black)
Screen spline
Velcro (optional)
http://i105.photobucket.com/albums/m228/time2board/IMG_0442.jpg
Tools needed:
Screen tool
Hacksaw
Scissors
Measuring tape
Blade
http://i105.photobucket.com/albums/m228/time2board/IMG_0443.jpg
Step 1:
Cut the screen frame in four pieces
(2) measuring 12"
(2) measuring 28.5"
Step 2:
Attach the screen frame corners
http://i105.photobucket.com/albums/m228/time2board/IMG_0445.jpg
Step 3:
Attach the screen to the frame
Step 4:
Paint the frame flat black to match interior.
End Result (before paint)
*Camera flash caused the screen to look gray... it's really black
http://i105.photobucket.com/albums/m228/time2board/IMG_0448.jpg
http://i105.photobucket.com/albums/m228/time2board/IMG_0449.jpg
End Result (after paint)
Screen and window
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-25.jpg
Screen and window (halfway)
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-26.jpg
From outside
http://i105.photobucket.com/albums/m228/time2board/Titan/photo-25-1.jpg
The measurements are precise so that you don't need to use Velcro. It's pretty snug.
I placed the screen inside the cabin to protect it from the elements.
Also, I've been known to forget to roll up the rear window. With the screen present, it doesn't look so obvious that the window is down.
Happy Modding!